Description
Novalynx Class A Evaporation Pan
Built to be compatible with all standard National Weather Service evaporation measurements. This pan is normally installed on a wooden platform set on the ground in a grassy location. There are two commonly used procedures for making evaporation measurements. In both procedures a 10”D x 47-1/2”ID stainless steel pan is used to hold the water. The first procedure for measuring daily evaporation loss is to use a graduated hook gauge set on a still well to determine the level of the water’s surface at each measurement. The second procedure is to use a still well with a fixed point, and each time a measurement is taken, refill the pan with a calibrated graduated cylinder having a surface area 1/100th that of the pan up to the level of the point. The amount of water added is the equivalent evaporation. Since the amount of evaporation is a function of temperature, humidity, wind, and other conditions, in order to relate the evaporation to current or expected conditions, the maximum and minimum temperature of the water and the amount of air passage are normally recorded along with the evaporation. Submersible/floating type minimum/maximum thermometers are available for recording these temperatures. Shipped motor freight.
Product Notes
- Ships Motor Freight/Common Carrier.
Have A Question?
Quick Specs
| MPN | 255-200 |
| UPC | 682318744090 |
| UNSPSC | 41114400 |
| Made In | United States |
| Other |
Class A Evaporation pan: low carbon stainless steel, heliarc welded. 10”H x 47-1/2”ID. Hook gauge: brass construction, 0.002” graduations. 7”L x 5-1/4” Diameter. Still well (Model 6826): stainless steel with leveling screws. 9”H x 4” diameter. Still well with fixed point (Model 6825): stainless steel. 9”H x 4” Diameter; height of point 7-1/2”. Replacement graduate: polycarbonate, graduated 0.01”/0.2 mm. Submersible/floating thermometer: U-tube maximum/minimum with magnet reset. Range: 20°F to 125°F (Stock #92592). Built-in solar radiation shield protects against direct sunlight and breakage. 11-1/4”L with floats. Totalizing anemometer (Model 2510): three-beaded conical type with 4” diameter cones. Six-digit counter with 0.1 mile or 0.1 km resolution. Aluminum construction with flange mount. 16”H x 12” diameter.
|
Documents
Quick Specs
Options and Accessories
Have a question about this product?