Solinst® Model 101D Water Level Draw Down Water Level Meters
Description
Solinst Model 101D WL Draw Down Water Level Meter, P7/LM3, 100´
One simple toggle switches between static water level and drawdown measurements! This meter not only allows accurate depth to water measurements in wells, boreholes, standpipes and tanks, but the drawdown function allows you to monitor falling hydraulic head during low flow sampling, pumping and other aquifer/well tests. It also ensures a pump’s intake remains submerged during purging or well development. The 101D Water Level DrawDown Meter uses a corrosion-resistant stainless steel probe connected to clearly marked flat tape, fitted on a well-designed reel. It is powered by a standard 9 volt battery. In water level mode, when the zero point on the probe enters water, an electronic circuit is completed, activating the buzzer and light. The depth to water is then read off the tape. In drawdown mode, the circuit is reversed— the buzzer and light are triggered when the probe is in air. The battery test button can check the circuit in both water level and drawdown modes. The on/off sensitivity control allows the buzzer to be turned down in cascading water and ensures a clear signal in high and low conductivity conditions.
Product Notes
- English Scales.
Have A Question?
Quick Specs
| Brand | Solinst |
| MPN | 114115 |
| UPC | |
| UNSPSC | 41114300 |
| Other |
Operating Temperature of Reel: -20°C to +50°C. Submerged Operating Temperature (tape/probe): -20°C to +80°C. Wetted Materials (tape/probe): PVDF, Santoprene, Delrin, Viton, 316 stainless steel. Probe Pressure Rating: Submersible to 1000 ft. (300 m). Probe Weight: ~4.5 ounces (128 g). Probe Size: 5/8˝ dia., 5.38˝ long (16 mm x 137 mm). Reel IP Rating: IP64 (dust and splash proof).
|
Quick Specs
Options and Accessories
Related Products
Shop All Water Quality ManagementHave a question about this product?